MAGNESIUM PHOSPHATE REPAIR MORTAR

EUCO-SPEED MP is a rapid-setting, rapid hardening, magnesium phosphate material used to repair concrete and masonry surfaces. EUCO-SPEED MP requires only the addition of water and can be installed with standard equipment and procedures. It bonds tenaciously to properly prepared concrete and provides a durable repair which is resistant to freeze-thaw cycles and deicing salts. For temperatures above 85°F (29°C), EUCO-SPEED MP HOT WEATHER should be used. For large placements use EUCO-SPEED MP HOT WEATHER extended with pea gravel.

Features & Benefits

• Rapid-setting for quick turnaround
• Suitable for both interior and exterior applications
• Durable under freeze-thaw cycles and salt exposure
• Versatility in thickness from 1/2” (12 mm) to 8” (20 cm) when extended with aggregate
• May be placed down to 0°F (-17°C)
• Can contribute to LEED points

Applications

• Bridge decks
• Anchoring
• Parking garages
• Floors
• Hand rail grouting
• Pavements
• Marine structures
• Joint repairs

Specifications / Compliances

• ASTM C928 - Standard Specification for Packaged, Dry, Rapid-Hardening, Cementitious Materials for Concrete Repairs
• Canadian Food Inspection Agency, MTQ, MTO

Packaging

EUCO-SPEED MP is available in 50 lb (22.7 kg) bags or pails. Yield: Approximately 0.42 ft3 (0.012 m3) of mortar when mixed with 0.45 gal (1.7 L) of water. For areas deeper than 1” (25.4 mm), EUCO-SPEED MP must be extended with up to 30 lb (13.6 kg) of 3/8” (9.5 mm) pea gravel*. Yield will increase to approximately 0.57 ft3 (0.016 m3) per unit. * Use only dust free, properly graded hard aggregate. Never extend EUCO-SPEED MP with limestone or aggregate containing limestone.