Phoscrete HC
DESCRIPTION
PHOSCRETE HC is a two‐part cementitious concrete repair material composed of
magnesium oxide, aluminosilicates, aggregates, and reinforcing fibers (Dry Mix),
plus a liquid phosphate activator (Liquid Activator). PHOSCRETE HC is very rapid
hardening, and gains strength suitable to vehicular traffic in less than one hour at
a wide range of ambient temperatures. PHOSCRETE HC forms both a chemical
and a mechanical bond to cured concrete and to itself.
PHOSCRETE HC meets ASTM C 928, Type R3.
DESCRIPTION
PHOSCRETE HC is a two‐part cementitious concrete repair material composed of
magnesium oxide, aluminosilicates, aggregates, and reinforcing fibers (Dry Mix),
plus a liquid phosphate activator (Liquid Activator). PHOSCRETE HC is very rapid
hardening, and gains strength suitable to vehicular traffic in less than one hour at
a wide range of ambient temperatures. PHOSCRETE HC forms both a chemical
and a mechanical bond to cured concrete and to itself.
PHOSCRETE HC meets ASTM C 928, Type R3.
PROVEN APPLICATIONS
Full depth and partial depth concrete repairs
Interior and exterior concrete installation and repairs
Horizontal surfaces: poured/castable applications
Vertical and overhead surfaces: form and pour applications
Bridge deck and parking deck repairs of reinforced concrete
Highway concrete spall and rutting repairs
Airport runway and apron concrete repairs
Dowel bar retrofit, pre‐cast joint grouting, bearing locations
Freezer floors, industrial floors, and loading dock repairs
Expansion joint nosing construction and repairs
ADVANTAGES
Labor and time saving material: no sandblasting of steel bars, no anticorrosion primer, no sacrificial anodes, no curing.
Easy and accurate mixing: two components, Dry Mix in a bag and Liquid
Activator in a jug. No water, pre-extended mix. self‐consolidating, fast
setting, easy clean up with water.
Rapid return to service: exceeds 4,000 psi (28 MPa) compressive strength
and 1,500 psi (10 MPa) bond strength 1 hour after placement at 68°F
(20°C).
Durable: freeze‐thaw and salt scaling resistant, even when exposed to
MgCl2 and CaCl2.
Fiber reinforced: high flexural strength and ductility.
Strong mechanical and chemical bond to clean cured concrete and to itself
with no cold joints
Stops rust and inhibits corrosion: converts iron oxide to metal phosphate.
Does not out‐gas after cure: accepts sealers and polymer coatings as soon
as 15 minutes following initial set.
Chemically stable: no added chlorides, resists chloride penetration.
Not a vapor barrier; allows on gradeapplications.
Environmentally friendly: no odor, no free silica.
All temperature use – sets in temperatures cold as -5°F (-20°C)
-use Phoscrete Fast-Set/Slow-Set Admixture to manage setting/working time
Additional information
Brand | Phoscrete |
---|---|
Sizes Available | 50 LB Bag |