Anchor Plate RJ721
The RJ 721 is comprised of a plate with legs (#2421) and a heavy duty seismic adjustable anchor (#2422).
The seismic anchor is notched to accept 9 gauge or 3/16″ continuous wire.
The seismic lug allows straight and cut wire to run horizontally along the bed joint in brick veneer.
ASTM A1064/A1064M, ASTM A82 / A82M - (Cold drawn steel wire)
Tensile Strength - 80,000 psi
Yield Point - 70,000 psi
ACI / ASCE 530 - (Building code requirements for masonry structures)
SHEET METAL - (Carbon Steel) ASTM A1008 / A1008M
Mill Galvanized / Zinc Coating: ASTM A641 / A641M (0.10 0z per sq ft)
Hot Dip Galvanized after fabrication / Zinc Coating
ASTM A153 / A153M-B2 (1.50 oz per sq ft)
Stainless Steel ASTM 580 / ASTM 580M Type 304 (Type 316 available on
special order)
SIZES / FINISHES
FINISH:
Mill Galvanized
# 2422 Seismic Pintle:
Corporate Office: 400 Rountree Rd Charlotte, NC 28217
TEL: (800) 849-6722 FAX: (704) 525-3761
Memphis Plant: 2365 Harbor Ave. Memphis, TN 38113
TEL: (800) 441-8359 FAX: (901) 775-9449
www.wirebond.com
Mailing Address: P.O. Box 240988 Charlotte, NC 28224 Mailing Address: P.O. Box 13124 Memphis, TN 38113
# 2421 Plate:
14 gauge 12 gauge (Plate length to accommodate insulation)
Recycled Content:
Mill Galvanized & Hot Dipped,
82.8% Post-Consumer
17% Post Industrial / Pre-Consumer,
Stainless Steel,
60% Post Consumer
V O C Content - 0%
MATERIAL CONFORMANCE
WIRE-BOND
WIRE-BOND
Hot Dip Galvanized Stainless Steel
Gauge: 12 gauge 11 gauge
Length: 3-1/2" 4-1/2" 5-1/2"
Insulation:
0" 1" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
Straight & Cut Continuous Seismic Wire:
Gauge: 9 gauge 3/16"
Additional information
| Brand | Wire- Bond |
|---|
Tech Sheet
SDS
Related products
