3 M 3015TWF Flashing
- Specially designed for use as a through wall flashing and damp proof course
- Exceptional puncture and abrasion resistance
- Can be applied at temperatures as low as 0°F (-18°C) and as warm as 150°F (66°C)
- Excellent adhesion to most construction surfaces without the use of a primer
Note: The following technical information and data should be considered
representative or typical only and should not be used for specification
purposes.
ASTM Test Method
Thickness: 15.5 mils (0.40 mm)
Film Thickness: 7.5 mils (0.19 mm)
Elongation at Break: >600% D-412, Die C
Tensile Strength >7.0 MPa (>1000 psi) D-412 ,Die C
Temperature Use Range:
Puncture Resistance
membrane:
0° to 150°F (-18° to 66°C)
>170 N (>38 lbf) E-154
Water Vapor Permeance:
Lap adhesion:
Moisture absorption:
0.05 Perms
>4.2 N/cm
CGSB 37GP56M
E96 Method B
D1876
D570
Low Temperature Flexibility
Nail Sealability
30°C Bend Test
127mm (5”) Water Head After
3 Days Dry
D1970-14,
Section 7.9
Additional information
| Brand | 3M |
|---|
Tech Sheet
SDS
Related products
