The ARDEX MC™ Moisture Control System is an epoxy-based moisture management system especially suited to treat areas of new concrete where the construction schedule is such that adequate drying of the concrete cannot be afforded. ARDEX MC is also recommended over existing concrete where the level of moisture emissions from the slab exceeds the maximum allowed by the manufacturer of the finish floor covering or coating. The system consists of the ARDEX P-MC® Moisture Control System Primer, which is yellow in color and used as the first coat, and ARDEX S-MC® Moisture Control System Sealer, which is green in color and serves as the sealer coat to receive a sand broadcast layer. This two-coat system reduces moisture emissions to an acceptable level, even over new concrete less than 28 days old, and serves as the priming system for ARDEX Engineered Cements. Reduces moisture from up to 20 lbs or 95% RH to less than 3 lbs overnight. P-MC: 200 sq. ft. per mixed unit, S-MC: 150 sq. ft. per mixed unit.
https://www.constructionmidwest.com/components/com_mijoshop/opencart/download/1056707830ARDEX MC ULTRA SEALER HARDENER PART B.pdf
https://www.constructionmidwest.com/components/com_mijoshop/opencart/download/1774184219ARDEX MC ULTRA SEALER RESIN PART A.pdf
https://www.constructionmidwest.com/components/com_mijoshop/opencart/download/677585302ARDEX MC ULTRA PRIMER RESIN PART A.pdf
https://www.constructionmidwest.com/components/com_mijoshop/opencart/download/1488174879ARDEX MC ULTRA PRIMER HARDENER PART B.pdf