Rebar Positioners

Function: Designed to position rebar vertically in block cell.
Dimensions: 9 gage wire, for 8 inch and 12 inch block.
Finishes: Mill Galvanized or Hot Dip Galvanized.

Special Notes: Will accommodate up to and including #8 rebar. Will position 2 or 4 bars. Can be installed after rebar is in cell.

Installation Note (for rebar positioners)
Bar positioners required by Uniform Building Code. Locate one at top of first course, one course below top of wall and at intervals not exceeding 200 bar diameters.