Reduce installation time with FSTR-30™

This 30 minute cure keeps production at its peak. FSTR-30™ is a two-component hybrid polyurethane adhesive for bonding many types of dissimilar materials together. This material forms a tough shock resistant bond that resists cracking or splitting due to heavy traffic or harsh conditions.

Get Quote

  • Features
  • Benefits
  • Uses
  • Completely cures in 20-30 minutes after application for heavy traffic at 70° F.
  • Cures rapidly in subzero environments.
  • Thin-gel™ technology mixes easily and tacks quickly.
  • Incredible bonding strength in a wide temperature range to concrete, brick, tile, marble, steel, asphalt, vct, wood, polystyrene, wood, and most porous surfaces.
  • Remains flexible, and will not shrink or expand.
  • Absorbs thermal and mechanical shock.
  • Excellent chemical resistance.
  • All material is self-mixed and delivered at the point of application. No messy pot-mixing or wasted product.
  • Safe to use. Materials react quickly and are solvent and odor free with 100% solids and no VOC’s. Nonflammable.
  • Removable with an electric heat gun.
  • Self-curing; does not need air or moisture to cure.
  • Save labor. Most bonded materials will be ready for use in about 30 minutes after application at 70° F. No waiting hours or days for adhesive to set.
  • Odor free and nonflammable, can be used in a wide range of indoor areas.
  • Easy application. All material is self-mixed with specially designed packaging.
  • Bonded materials stay in place. No lifting or expanding as the material cures.
  • Bond ceramic to marble.
  • Bond stainless steel to wood.
  • Bond to glass
  • Bond to aluminum, brass and copper.
  • Bonding tack strips to concrete or wood floors
  • Bonding carpet moldings to concrete or wood floors.
  • Bonding stair nosings to concrete, wood, or steel stairs.
  • Repairing concrete cracks and spalls.
  • Bond polystyrene foamboard to itself or most anything.

Keep production at its peak


Securing molding and tack strips to concrete floors just got a lot easier and a lot faster. A NEW two-part polyurethane, called FSTR-30 can be dab or bead applied. Cartridge mixed and dispensed, each 300 ml. “Ratio-Pac” will hold about 200 linear feet of tack strip, permanently in place. Carpet can be stretched and installed in 20-30 minutes. FSTR-30 contains no solvents, is odorless self-leveling and has a good open time. This material contains nearly 60% renewable content and qualifies for LEED credits. Stair nosings and transition strips are cemented in place with the same ease. Any unused portion may be resealed for later use. FSTR-30 works great in radiant heat floors where drilling and nails are not allowed. It adheres to almost any substrate including ceramic tile, VCT, wood, metal, and vinyl. FSTR-30 is packaged in 300ml cartridges, 50ml cartridges and 30ml cartridge kits.


Watch the FSTR-30 tackless strip pull-off test to the left. You will actually rip the tacks apart, shred the carpet or pull apart the subfloor before the tackless strip will release from the floor.



FSTR-30-THIN-Gel 50ml

Get Quote

300ml Kit

Get Quote